Steinberg Systems SBS-PS-500N Manual De Instrucciones página 10

Bácula de plataforma
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 37
PLEASE NOTE! Drawings in this manual are for illustration purposes only and in some details may
differ from the actual product.
2. Usage safety
ATTENTION!
Read all safety warnings and all instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or serious injury or even death.
The terms "device" or "product" are used in the warnings and instructions to refer to:
Floor scale
2.1.
Electrical safety
CAUTION: The rules of "electrical safety" should be followed when the device is powered from the mains.
a)
The plug must fit the socket. Do not modify the plug in any way. Using original plugs and matching
sockets reduces the risk of electric shock.
b)
Avoid touching earthed elements such as pipes, heaters, boilers and refrigerators. There is an
increased risk of electric shock if the earthed device is exposed to rain, comes into direct contact with
a wet surface or is operating in a damp environment. Water getting into the device increases the risk
of damage to the device and of electric shock.
c)
Do not touch the device with wet or damp hands.
d)
Use the cable only for its designated use. Never use it to carry the device or to pull the plug out of a
socket. Keep the cable away from heat sources, oil, sharp edges or moving parts. Damaged or tangled
cables increase the risk of electric shock.
e)
If using the device in a damp environment cannot be avoided, a residual current device (RCD) should
be applied. The use of an RCD reduces the risk of electric shock.
f)
To avoid electric shock, do not immerse the cord, plug or device in water or other liquids. Do not use
the device on wet surfaces.
g)
Do not use in very humid environments or in the direct vicinity of water tanks.
h)
Prevent the device from getting wet. Risk of electric shock!
i)
Do not plug the charger into an extension cord.
j)
Do not charge the battery in explosion risk zones.
2.2.
Safety in the workplace
a)
If you discover damage or irregular operation, immediately switch the device off and report it to a
supervisor without delay.
b)
If there are any doubts as to the correct operation of the device, contact the manufacturer's support
service.
c)
Only the manufacturer's service point may repair the device. Do not attempt any repairs
independently!
d)
Please keep this manual available for future reference. If this device is passed on to a third party, the
manual must be passed on with it.
e)
Keep packaging elements and small assembly parts in a place not available to children.
f)
If this device is used together with another equipment, the remaining instructions for use shall also be
followed.
Remember! When using the device, protect children and other bystanders.
2.3.
Personal safety
a)
The device is not designed to be handled by persons (including children) with limited mental and
sensory functions or persons lacking relevant experience and/or knowledge unless they are supervised
by a person responsible for their safety or they have received instruction on how to operate the
device.
b)
The device is not a toy. Children must be supervised to ensure that they do not play with the device.
loading