Winkhaus blueMatic EAV Instrucciones De Montaje página 101

Installation, Operating and
Maintenance Instructions
The proper functions of the access control systems and the accessories included
in the scope of delivery of the Winkhaus company have been tested. If you use
components made by other companies and if you have any doubts about the
suitability of these components, you will have to contact the respective manu-
facturer to ensure their fitness for use.
To ensure the intended use:
• the information and instructions required for this purpose have to be passed
on to the respective persons,
• only trained professionals should install the door furniture, locking units and
accessory parts according to the installation instructions. Applicable DIN, EN
standards and BauPVO are about to follow.
The stipulations for use as intended have been met, once the Winkhaus fittings
are:
• installed according to their defined function and the installation
specifications,
• not used in any other way than described,
• maintained and cared for at regular intervals as instructed, and / or defined
sliding places oil at least 1 x annually (like e.g. chamfer of latch ...) if necessary
more frequently,
• not used if signs of wear are detected,
• repaired by trained professionals in the event of malfunctions.
The supplier / manufacturer does not accept any liability for personal injury or
material damage caused by incorrect operation or improper use.
Aug. Winkhaus GmbH & Co. KG ∙ Berkeser Straße 6 ∙ 98617 Meiningen
T +49 369 3950 - 0 ∙ www.winkhaus.de ∙ Subject to technical changes
blueMatic EAV 7 5044744
EN
1