Joycare JC-1207 Manual De Instrucciones página 16

JC-1207/1208/1209
GB
7
• Pull the harness adjustment strap to adjust the harness to the right length (FIG.7)
• Untie, and then re-tie up, the lace fastening at the back of the headrest cushion, in order to adjust
it to the desired height in one of three slots, depending on the height for the harness previously
decided on. (Fig.8)
NOTE: For group 0+, the usual height for the harness and the cushioned headrest is either at the
first or the second slot in the back, depending on the size of the child. (FIG.9)
FITTING INTO THE CAR - GROUP 0+ (For children from 0 to 13 kg)
REARWARDS FACING ONLY
(DO NOT USE ON SEATS EQUIPPED WITH BUILT-IN AIR BAGS)
A) For children weighing less than 5.5 kg, always use the padded newborn insert (FIG.10)
10
B) Press the seat reclining adjustment handle and pull the seat to the fully reclined position.
The fully reclined position required for group 0+ is reached when the red arrow on the side of the
back seat lines up with with position "4" indicated on the corresponding side of the base and you
will hear a "click" as it locks.
C) Place the child seat on the seat of the car, one equipped with three-point seatbelts (FIG.13)
11
16
10
8
12
3
2
1
9
13