Goodyear GY 1300G Manual De Usuario página 25

English
Owner´s manual
•
The generator can supply AC power at 110/220V, set the voltage selector (if equipped) to the position that
suits your equipment. If the generator is not equipped with a voltage selector, there will be a 110V and a
220V plug respectively. Please plug in a power cord suitable for the electrical load you will need.
Instruction on DC Usage
Pay special attention when connecting the positive and negative poles to the DC socket.
CAUTION. Do not use the DC output as a current source for charging batteries.
6. STOPPING THE ENGINE
In case of emergency
Set the ignition switch to OFF position directly to stop the generator.
Under normal conditions
• Turn off the AC circuit breaker and unplug all outlets.
• Run the unit unloaded for a few minutes to allow the generator to cool down.
• Turn the ignition switch to the OFF position (Fig. 11).
• Close the fuel cock. OFF position (Fig. 12).
WARNING. Don't touch any of the components that get hot until the unit is turned off and has cooled
down completely to avoid burns.
CAUTION. Fuel storage in unit which is not to be used for long time will cause it difficult to start the
engine. Drain the fuel for long-time storage of the unit.
25