Idiomas disponibles
Idiomas disponibles
Calling up readings from memory
Readings can be recalled after being saved without having to switch the unit on.
Readings will not be displayed if they have not been saved.
Fig. 11-a
1. Press the Memory/Recall button (Fig. 11-a).
Ma]
* The average reading of all recorded measurements is
displayed.
[fm
+ The GZ mark will be displayed (Fig. 11-b).
+ When, for example, readings from 90 measurements
Y
have been saved the average of the readings from 90
Fig. 11-b
measurements will be displayed.
e lf there is only 1 measurement
recorded,
mark
sys.
MITI
í
:
sh
iHe
will not be displayed.
DIA.
ma
2. Press the Memory/Recall button to display readings
"e
GIT
starting with from the most recent measurement.
Te
The!
* Each time the Memory/Recall button is pressed
readings are displayed
in order of the most recent
measurement (Fig. 11-c, 11-d).
3. Press the On/Off and Start button to switch off the unit.
If you forget to switch
off the unit it will do so
(me |
automatically after approx. 30 seconds.
A
m
r
Deleting all data stored in memory
v
(1) Recall stored data using the Memory/Recall
Fig. 11-d
button.
(2) Press the Memory/Recall button again and hold
ae (75
it (for approx. 3 seconds) until all readings are
a
Pa be
deleted.
a
|
NOTE: Readings from individual measurements
Puso
MA
cannot be deleted.
Mm ye
(3) If everything has been deleted, the ™) mark and
DO will be displayed.
A
21
