Panasonic EW3006 Instrucciones De Funcionamiento página 19

Idiomas disponibles

Idiomas disponibles

Movement detection function
If movement
is detected while measurement is being carried out and more
pressure is applied by the pressure cuff, the S3
mark will be displayed.
e Please carry out blood pressure measurement
again if the ES
mark
flashes or is lit.
e If the hand or wrist to which the pressure cuff is attached is moved while
measurement
is being carried out (e.g. the wrist is moved
suddenly), in
some cases correct measurements may not be obtained.
e When movement has been detected during measurement, the ESS
mark
flashes when
the blood pressure
reading obtained
during that
measurement is displayed.
(If this reading is saved, the ESS mark will flash whenever it is recalled.)
Movement Mark
Explanation
=
El
1)
mmHg
[UN]
Flashing
Movement has been detected.
- The hand or wrist has been bent suddenly.
- The muscles around hand or wrist have been tensed.
- The hand or wrist has been moved, etc.
With correct posture, please take the measurement again after
measurement has been completed (see pages 12-14).
Movement has been detected that will significantly affect the reading.
- Significant movement has been detected.
- Movement has been detected repeatedly.
- Significant hand or wrist movement has been detected, etc.
Please take the measurement again (An E will appear on the
display).
* An E will also appear on the display in the following cases:
- When the pressure cuff hook-and-loop fastener has become
loose, etc.
(Please see page 25 for further details.)
* This function is designed to help you to take measurements accurately (see page 23).
Even if the Movement mark is not displayed, we recommend that measurements be taken
2~3 times in a comfortable position in order to obtain an accurate reading. Remember to
rest 5 minutes in between readings. (see pages 12-14 for correct position).
18
loading