Bixpy PP-768 Manual Del Usuario página 9

OPERATING YOUR BIXPY PP-768 AND BIXPY MOTOR
Your Bixpy Outboard Power Pack turns on and off using the provided magnetic kill switch with leash. Wear
your kill switch and leashes on your body at ALL TIMES.
If you motor is not running as expected and shakes and vibrates or runs in the wrong direction the most common
reason is a poorly mated connector which will lead to water intake and shorting of the connector pins. Remove
your connector, dry everything and reconnect your Power Pack following the correct mating procedure. Repeated
failed connections can result in damage to the motor and/or Power Pack which is not covered under warranty.
As your battery drains from use your white LED indicators will turn off one by one until you reach the last LED. As
your battery approaches empty the last white LED will start flashing to indicate that you will soon lose power. Once
the last LED begins to flash you will have less than 10% of the battery left before it shuts off completely.
Placing your kill switch on your Power Pack will turn your
system on and your battery level will be indicated on the white
LED battery status window. Six white lit LED lights indicate a full
battery and a drained battery will show no lights or a single
flashing LED light.
Once your Bixpy Motor is connected and your OPP is activated
you will be able to operate your motor using your Bixpy Remote
Control. The Power Pack provides 12 forward speeds 3 reverse
speeds, a 13th Turbo Speed in forward beyond the 12th speed,
and a full stop function. DO NOT run your motor in air at higher
speeds or for any significant amount of time. It is okay to run
your motor in air at lower speeds for about 5 to 10 seconds for
verification purposes.
Page 8