Disposal of the packaging
The packaging consists of cardboard and correspondingly marked plastics that can
be recycled.
•
Make these materials available for recycling.
TECHNICAL DATA
Rated voltage
Capacity
Protection class
Protection type
Stroke rate with no load
Maximum cutting depth
1.
Wood
2.
Steel
Noise output level (L
Noise pressure level (L
Vibrations**
Suitable saw blades
*) The specified values are emission values and do not necessarily represent safe workplace values. Although there is a
correlation between emission and immission levels, this cannot be used to infer whether additional safety measures are
necessary or not. Factors which affect the current immission levels at the workplace include the type of room, other sourc-
es of noise, e. g. the number of machines operating and other processes taking place in the vicinity. Permitted workplace
values can differ from country to country. This information is designed to help the user to better assess the dangers and
risks. Determination of noise emission values in accordance with EN 60745-1.
**) The specified vibration emission value was measured in accordance with a normed test procedure and can be used
in order to compare one tool with another. The specified vibration emission value can also be used for an introductory
evaluation of the exposure. The vibration emission value may fluctuate from the specified value during actual use of the
power tool. These fluctuations will depend on the way in which the power tool is used. Try to keep vibrations to a minimum.
One method of reducing the vibration load is, for example, limiting the length of time you work with the tool. All parts of
the operating cycle must be taken into account for this purpose (for example, also including times when the power tool is
switched off and times when it is switched on, but is running without load). Determination of vibration emission values in
accordance with EN 60745-1.
)*
WA
)*
PA
230 V~, 50 Hz
900 W
II
IP20
0–2800
min-1
115 mm
8 mm
97 dB(A)
(K = 3 dB(A))
86 dB(A)
(K = 3 dB(A))
7,6 m/s²
(K = 1,5 m/s²)
S shaft
31