YOUR UNIT AT A GLANCE
1. Locking sleeve for saw blade
2. On/Off switch
3. Locking button for permanent operation
4. Stroke regulator
5. Foot plate
6. Saw blade
Scope of delivery
•
Sabre saw
•
Saw blade
•
Operating manual
USING FOR THE FIRST TIME
Fitting the saw blade
DANGER! Risk of injury! Pull out the power plug before conducting any maintenance
work on the device.
Shortly after sawing, the saw blade may be very hot. Risk of burning! Allow a hot blade to cool
down. Never clean a hot saw blade with flammable liquids.
Even a saw blade which is at a standstill can still cut! Always wear gloves when replacing the
saw blade.
Note: If necessary the saw blade can be rotated by 180° and thus tensioned.
•
Turn the locking sleeve (1) anti-clockwise
•
Place the saw blade (6) as far as it will go into the holder.
•
Release the locking sleeve (1).
•
Ensure that the blade is securely fitted into place.
OPERATION
Check before switching on!
Check to make sure the device is in a safe operating condition:
•
Check to make sure there are no visible defects.
•
Check to make sure all device components are correctly mounted.
Switching on and off
•
Switching on: Press the On/Off button (2).
•
Permanent operation: Press the locking button with the On/Off switch (3) held down.
•
Set the required stroke rate with the rotating regulator (4).
Adjusting the foot plate
The foot plate can be moved along the length according to saw blade length and application.
•
Undo the hexagonal socket screws (7).
•
Move the foot plate (5) into the required position.
•
Tighten the hexagonal socket screws (7) back up again.
28