Unit Assembly - Hayward AQUARITE FLO Manual Del Usuario

4. ELECTRICAL CONNECTIONS TO ELECTRONIC BOX
Page 4 of 5

3. UNIT ASSEMBLY

Rubber hinge
X2
Wall screw
X4
1. Without opening the unit cover, screw the 4 suspension eyes to the box from behind.
2. Place the unit against the wall and mark the position of the 4 eyes.
3. Drill and insert the 4 rawlplugs into the wall.
4. Screw in the 4 wall screws and hang up the unit.
5. ELECTROLYSIS (from 3 g salt/L)
USE ONLY GENUINE REPLACEMENT PARTS
AquaRite Flo
Rubber stopper
for hinges X2
Suspension eye
X4
Connect all the sensors carefully, a bad
connection may cause irreparable damage to
the equipment.
CELL

Blue

Brown

Yellow / green
During normal operation, the LEDs light up blue.
Adjust the production, in grams of chlorine/hour, using the buttons '+' and '-'.
Example: For a 22 Gr Cl2/h unit:
Blue LED(s) lit
1
5
9
Rawlplug
X4
Screw for suspension eye
X4
COVER FLOW SWITCH
FL1
 
&
 
&
% production g Cl2/h
11 % 2.5 g Cl2/h
55.5 % 12.3 g Cl2/h
100 % 22 g Cl2/h
Rev. A