Idiomas disponibles
Idiomas disponibles
EN
INSTRUCTIONS ON ASSEMBLY AND USE
CONGRATULATIONS ON PURCHASING THIS PRODUCT!
Please read these instructions carefully. The instructions are an integral compo-
nent of the product. Therefore, please store them and the packaging carefully in
case questions arise in the future. Please always include these instructions when
handing on the product to a third party. This product must be assembled by an
adult. This product is designed for private/domestic use only. This product is not
designed for commercial / industrial use. The use of the product requires certain
capabilities and skills. Always adjust according to the age of the user and use for
the purpose it has been designed for.
TECHNICAL SPECIFICATIONS
Item:
Soccer Goal Pro Tect 180 | 240 | 300
Item number:
76913 | 76914 | 76915
Dimensions when assembled: 180 x 120 x 60 cm | 240 x 160 x 85 cm |
300 x 200 x 120 cm
Purpose:
Training goal for versatile throwing, shooting and
goalkeeper training with enhanced impact pro-
tection.
If you have assembly problems or would like further information on the product,
we have all you need and more at http://www.hudora.de.
CONTENTS
1 x Soccer goal (see parts list on page 2) | 1 x These instructions
Other items included are meant to facilitate safe transportation and are not re-
quired for the installation and use of the product.
SAFETY INSTRUCTIONS
• WARNING! Not suitable for children under 36 months. Long cord. Strangulation
hazard.
• WARNING! Do not climb on the goal frame or net or hang from the goal posts.
There is a serious risk of injury!
• Prior to use, check all parts of the goal for damages and correct assembly.
In this regard, it is important to check the connecting elements and screw
connections for stability and fit. Any sharp edges that might have formed must
immediately be removed!
• Children should only use the product when they are under adult supervision.
• No liability is assumed for damages resulting from incorrect application of the
instruction manual.
ASSEMBLY INSTRUCTIONS
Notice: The product must be assembled by 2 adults. Lubricate the connection
assemblies on the narrow ends a bit before starting the assembly. That facilitates
the assembly and extends the durability of the product!
1. Assembling the goalpost frame and net
Remove all components from the packaging and arrange in front of you correctly
sorted, in particular the numbered tube parts as well as the goal net. Ensure that
the HUDORA logo on the frame encasing is centrally positioned on the crossbar.
Step 1: First assemble the goal frame as shown in Figure 1. The numbered goal
poles are connected to each other via click connections. In some cases, the goal
poles are already provided with a foam covering. Make sure that these already
sheathed goal poles are part of the front goal poles (lath and post).
Step 2: Also install the remaining foam sheathing on the front goal poles (lath and
post) as shown in Figure 2 so that they are completely padded. On the goal cor-
ners, the foam sheaths are cut separately so that complete padding is provided.
The foam sheaths are partially cut open on the back to allow for easy installation
on the goal posts.
Step 3: After the goal frame is completely assembled, the goal net can be instal-
led. To do this, pull the goal net over the goal frame from behind. The HUDORA logo
must be positioned centrally on the crossbar. Now open the zipper of the black
tarpaulin sheathing and that of the mesh tunnel. Wrap the tarpaulin sheathing
around the goal batten 1 and the two posts 2 and 3 as shown in Figure 3. The
mesh tunnel must be wrapped around the bottom batten 4. Close the zippers af-
terwards. When closing the zippers, make sure that no pieces of fabric get caught
in them. The sheathing should be fixed as tightly as possible around the padded
goal bars without wrinkles.
All images are examples of the design.
UKAR Contact: UKCA Experts Ltd. | Dept 302, 43 Owston Road |
Carcroft, Doncaster, DN6 8DA | United Kingdom
Step 4: Now fix the goal net to the lower back goal bars 5 and 6. To do this, open
the hook-and-loop fasteners on the mesh tunnel loops, loop them around the
ground poles and then close the hook-and-loop fasteners again (Fig. 4).
2. Stand locking of the goal
Finally fix the goal frame by means of the pegs on the ground. Ascertain that the
ground is suitable for the application of pegs (e.g. no water pipes for sprinkler
devices!). Make sure that the pegs are completely driven into the ground and have
firm position. Avoid protruding fastenings (risk of stumbling). On too hard grounds
the goal must be saved by appropriate measures in another way against overtur-
ning in order to prevent risk of injuries (e.g. with slabs or sandbags). Never play
with an unsecured goal or never leave the goal unsecured respectively.
USAGE INSTRUCTIONS
• Only set up the goal on level ground.
• Please keep a minimum distance of at least 3 m to any surrounding obstacles.
• Secure the goal to keep it from toppling over – even if not in use.
• Avoid exposing the product unnecessarily to bad weather conditions. Keep it in
a cool and dry storage area.
• Check for any rust on the product and remove it immediately. Pushing together
the metal parts could lead to the protective layer being scratched and rust
developing.
MAINTENANCE AND STORAGE
Use a dry or damp cloth only to clean the product; do not use special cleaning
agents! Check the product for damage or traces of wear and tear before and after
each use. Do not make any structural changes. For your own safety, please use
original spare parts only. These can be sourced from HUDORA. If parts become da-
maged or if sharp edges or corners should develop, the product may not be used
any more. If in any doubt, please contact our service team (http://www.hudora.
de). Store the product in a safe place where it is protected from the elements,
cannot be damaged, and cannot injure anyone.
DISPOSAL ADVICE
At the end of the product's life, please dispose of it at an appropriate collection
point provided in your area. Local waste management companies will be able to
answer your questions on this.
SERVICE
We make every effort to deliver faultless products. If faults do arise however, we
put just as much effort into rectifying them. You can find numerous information on
the product, replacement parts, solutions to problems and lost assembly manuals
at http://www.hudora.de.
5/12
