To Sew - Sears Kenmore 385.16520000 Manual De Instrucciones

Tabla de contenido

Automatic Buttonhole (Continued)

. To

sew

O Stitch selector:

(_) Stitch width:

(_ Stitch length:

3 to 4

@ Needle thread tension:

2 to 6

@ Presser foot:

Buttonhole foot

NOTE;

Best results are obtained by using #60 or #80 lightweight

thread for bobbin thread, it is advisable to use a #11 blue

stretch needle when sewing knits and synthetic fabrics_

You can obtain buttonholes with wider cutting space by

setting stitch width at 1.5 instead of 2.

(_ Needle thread (Top thread)

(_) Bobbin thread (Bottom thread)

(_) Two round holes

@ Rectangular hole

@ Two pins fitting with the two round holes

@ Hook

O Lever

@ Base plate

Remove the extension table (accessory box)° Raise the

needle to its highest position by turning the handwheel

counterclockwise,,

Remove the foot holder., Pull bobbin

thread about 3" (7.0 cm) straight back toward the rear of the

machine,, Insert the hook of the base plate@into

the

rectangular hole on the needle plate ®,, Pull leverOback

to align the hook with the rectangular hole. Snap base

plate@down

to fit the two pins@at

the back of base plate

into the two round holes on needle plate (_). Release the

lever.,

_WtDTH

LENGTH

Tabla de Contenido

Tabla de contenido