Tabla de contenido
SECTION
II. GETTING
READY TO SEW
Connecting Machine to Power Supply
0
Power supply plug
(_) Power switch
Outlet
(_ Machine socket
(_) Machine plug
(_ Light bulb
Before connecting the power cord, make sure the voltage
and frequency shown on the machine conform to your
electrical power
1. Turn off the power switch(_) ,r
2_ Insert the machine plug 0
into the machine socket Q,
3. Insert the power supply plug_) into the outlet (_ •
4_ Turn the power switch(_ to turn on. the power and
sewing light _}
For Your Safety
* While in operation, always keep your eyes on the sewing
area_ Do not touch any moving parts such as the thread
take-up lever, handwheel or needle,
* Always turn off the power switch and unplug from the
power supply:
- When leaving the machine unattended°
- When attaching or removing any parts.
- When cleaning the machine.
* Do not place anything on the foot control, when not sewing.
Operating
Instructions:
"For appliances with a polarized plug (one blade wider than the
other). To reduce the risk of electric shock, this plug is intended
to fit in a polarized outlet only one way tf it does not fit fully in the
outlet, reverse the plugo If it still does not fit, contact a qualified
electrician to install the power outlet. Do not modify the plug in
any way."
"Foot Controller Model YC-482P is used with Sewing Machine
Model 385 12314XXX_" XXX - represents numbers 000 through
999°
Controlling Sewing Speed
Sewing speed can be varied by the foot control,
The harder you press on the foot control, the faster the
machine runs°
k_
(-
f-
%,.....
f
OFF
ON
6
Tabla de contenido
