Idiomas disponibles
Idiomas disponibles
5.
Place the coffee pot on the hot plate under the drip stop.
6.
Plug in plug into the power socket and press the on-off button
guidelines.
7.
Press the number of cups button
You can select 2, 4, 6, 8, 10, or 12 cups. Make sure that the amount of water in the water reservoir
matches this number. If you do not press this button, the default setting is 12 cups.
8.
Press the button for ground coffee
9.
Press the on-off button
symbol
10. When the coffee is ready, you will hear a signal and the symbol
·
You can remove the carafe from the coffee maker at any chosen time for a maximum of 30 seconds to
pour coffee. The appliance will stop dripping automatically.
·
The final amount of coffee will always be a little less than the amount of water you put in, because the
coffee absorbs water.
·
Be careful while pouring, the coffee is hot right after brewing.
·
For safety reasons it is considered wise to keep the lid on the carafe. This way the coffee also stays
warm.
·
The device will keep the coffee warm for up to 40 minutes. Afterwards, the device will shut off
automatically. To maintain an optimal coffee taste, it is best to serve the coffee right after brewing.
·
Always make sure that the coffee maker is switched off and unplug the power cord from the outlet
when the appliance is not in use.
POINTERS FOR GREAT COFFEE
·
A clean coffee maker is essential to make great tasting coffee. Clean the appliance regularly according
to the guidelines. Always use fresh, cold water in the coffee maker.
·
Store coffee in a dry and cool place.
·
Do not reuse any coffee, as this will greatly affect the taste of your coffee. We also do not recommend
reheating coffee.
SETTING THE TIMER
1.
Make sure the time is set correctly.
2.
Prepare the appliance to set coffee as indicated under "use" but do not press the on/off button yet.
3.
Press the timer button for 5 seconds. The hour on the display will blink.
4.
To set the timer, press the hours button and the minutes button.
5.
Press the timer button again to confirm. The indicator lamp will now light up red and the symbol
will appear on the display. If you do not press the timer button to confirm, the current time appears
again on the display. The hour set is stored, but the timer function is not activated. Press the timer
button again to activate the function.
6.
The coffee will begin to run at the time that has been set using the timer.
·
If you want to cancel the timer function, press the timer button again. The red indicator lamp of the
timer button goes out and the symbol
·
As long as you do not remove the plug from the power socket, the timer hour will be stored. If you
want your coffee made at the same time every day, all you have to do is press the timer button once
to activate the timer function. The device remembers the previously selected time and you do need to
set the time again. If you still want to set a different time, proceed as described in the previous steps.
28
DO721K
. The indicator lamp will now light up red and coffee will start to flow. The
appears on the display.
until the desired number of cups appears on the display.
. It will light up red.
on the display disappears.
. Set the time by following the
on the display will disappear.
