SELF-DIAGNOSIS
The appliance has a self diagnosis system to identify a number of warning/malfunctions.
Error messages are displayed on the appliance display.
IF ... IS DISPLAYED,
"Low Temperature"
(frost prevention)
..WHAT SHOULD I DO?
The appliance is fitted with a
frost protection device to avoid
excessive formation of ice. The
appliance starts up again auto-
matically when the defrosting
process is completed.
TIPS FOR CORRECT USE
To ensure optimal results from your air conditioner, follow these
recommendations:
•
Close the windows and doors in the room to be air condi-
tioned When installing the air conditioner semi-perma-
nently, you should leave a door slightly open (as little as
1/2'' inch. (1 cm)) to guarantee proper ventilation.
Close doors and windows
IF ... IS DISPLAYED,
"High Temperature"
(Overheating protection)
..WHAT SHOULD I DO?
The appliance is fitted with an
overheating device which in
case of operating conditions
with excessive room tempe-
rature for a long period, will
switch the appliance to ven-
tilate only. The appliance will
be automatically restored as
soon as the temperature will
be close to the operating limit
conditions.
IF ... IS DISPLAYED,
"Probe Failure"
(Probe damaged)
..WHAT SHOULD I DO?
If this is displayed, contact
our toll free customer service
number.
•
Never use the appliance in very damp rooms (laundries for
example).
•
Protect the room from direct exposure to the sun by par-
tially closing curtains and/or blinds to make the appliance
much more economical to run.
Close blinds or curtains
•
Never use the appliance outdoors.
•
Make sure there are no heat sources in the room.
•
Make sure the air conditioner is standing on a level surface.
14
IF ... IS DISPLAYED,
"High Level"
(Internal tray full)
..WHAT SHOULD I DO?
Empty the internal safety tank
following the instructions in
the section "End of season ope-
rations".