Airzone AirQ Sensor AZX6AIQSNSB Guía Rápida página 7

Ionization
The PM or PM measurements made by the AirQ Sensor may activate ionization, and
2.5 10
therefore air conditioning, depending on its configuration:
•
Auto. (By default) Ionization and air conditioning may be activated when the PM
measurement status falls within the ranges defined as Medium or Low.
•
Manual ON. Ionization will be activated when the zone is active and in demand, regardless
of the PM or PM
2.5
the range defined by the user as Medium or Low and the zone is off or in comfort, a warning
will be sent to the user in the form of a notification or air conditioning will be activated to
ionize according to the priority set in the "IAQ Priority" parameter.
•
Manual OFF. Ionization will remain off regardless of the PM
and the zone status.
IAQ Priority (only if AirQ Box is available)
The Indoor Air Quality priority can be set from the zone settings menu. The logic of this
parameter is as follows:
•
Deactivated. (By default) Thermal comfort will be prioritized over the PM
measurement status, i.e., if the zone is in thermal comfort and the PM
measurement status is Medium or Low, neither air conditioning nor ionization will be
activated to correct the PM
•
Activated: PM or PM
2.5
the zone is in thermal comfort and the PM
air conditioning and ionization will be activated to correct the PM
status.
measurement status. If the PM
10
or PM measurement status.
2.5 10
measurement status will be prioritized over thermal comfort, i.e., if
10
or PM measurement status falls within
2.5 10
2.5
or PM measurement status is Medium or Low,
2.5 10
2.5
or PM measurement status
10
2.5
2.5
or PM measurement
2.5 10
or PM
10
or PM
10
or PM
10
7