Idiomas disponibles
Idiomas disponibles
Assembly
To install the device, follow the steps below:
1.
Position and screw the base of the device to the embedded box.
2.
Fit the top of the AirQ Sensor device into the protruding rib on the base and rotate until the
device is fully secured by the magnets.
If you wish, you can secure the device by a small anti-theft screw located at the bottom.
1
INDOOR AIR QUALITY INDEX
The Indoor Air Quality (IAQ) index is calculated according to the active variables, the configured
weight and the limits set for each of these variables. By default, the active variables to calculate
the IAQ index are:
•
CO
: Weight assigned by default 80%.
•
2
TVOC: Weight assigned by default 20%.
You can activate the variables you consider appropriate for the calculation of the Indoor Air
Quality index by indicating a weight greater than 0%.
The IAQ index is represented by three statuses according to the value of the calculated indoor
air quality index:
The hysteresis defined for the change of IAQ index status is ±5%.
2
Good
Medium
100-70
69-30
Low
29-0
5
