Idiomas disponibles
Idiomas disponibles
IMPORTANT! Kohler Co. strongly recommends the use of 100% silicone sealant as instructed. Other sealants with high
filler contents should be avoided, as they may shrink, separate, and peel over time.
Install water-resistant wallboard and all finished wall, deck, and floor materials.
Apply a minimum 1/8" (3 mm) bead of 100% silicone sealant to seal all areas where the bath and finished wall or deck
meet.
Install the faucet trim.
Clean-up After Installation
When cleaning up after installation, do not use abrasive cleansers, as they may scratch and dull the bath surface. Use
warm water and a liquid detergent to clean the surface of the bath.
Remove stubborn stains or paint with turpentine or paint thinner. Do not allow cleaners containing petroleum
distillates to remain in contact with any bath surface for long periods of time. Remove plaster by carefully scraping
with a wood edge. Do not use metal scrapers, wire brushes, or other metal tools. Use a powder-type detergent on a
damp cloth to provide mild abrasive action to any residual plaster.
1512796-2-A
10
Kohler Co.
