LG WH20S F5 Manual Del Propietário página 20

Ocultar thumbs Ver también para WH20S F5:

Idiomas disponibles

Making Electrical

Disconnect all power before working on

any electrical connections.

The ground connection is mandatory.

Never supply power to heating element

directly. Upper and lower heating

elements are installed on the

product.(230 V, 2 kW)

• All wiring must conform to European and

national standards, and must be protected by

a 30 mA RCD(Residual current device).

• Means for disconnection must be

incorporated in the fixed wiring in

accordance with the wiring rules.

The water heater must be permanently powered

by electricity to ensure correct operation of the

impressed current titanium anode (ICCP).

Do not turn on power until water heater is

completely filled.

The appliance can only be connected and

operated on a single-phase 230 V AC grid.

The electrical installation will include:

• The installation of a residual current device

(RCD) having a rated residual operating

current not exceeding 30 mA is advisable.

• The rating of the residual current device

(RCD) to be installed

The supply cord cannot be disconnected from

the product.

The supply cord cannot be replaced. If the

cord is damaged the appliance should be

In order to avoid a hazard due to inadvertent

resetting of the thermal cut-out, this

appliance must not be supplied through an

external switching device, such as a timer,

or connected to a circuit that is regularly

switched on and off by the utility.