Idiomas disponibles
Idiomas disponibles
Position sensor
By means of the «select» button (D) placed underneath the
battery compartment cover, you can de-activate the position
sensor (e.g. if you want to measure while lying down).
Proceed as follows:
• First turn off the product. Press the «select» button for
2 seconds.
• The position sensor symbol (flashing) will be displayed
next to «on».
• Press the I/0 button to change the setting from «on»
(position sensor activated) to «--» (position sensor
deactivated).
• To confirm the change of setting, press the memory
button.
Please note:
Unless you confirm a modified setting by pressing the
I/0 button, the appliance will turn off automatically after
2 minutes without adapting the modified setting.
Storage and cleaning
Clean the product with a soft, slightly damp cloth. Stains on
the cuff (G) can be carefully removed with damp cloth. Do not
wash or dry clean the cuff. Do not store the product in a place
exposed to direct sunlight or high humidity.
Calibration
This product has been calibrated at the time of manufacture.
If used according to the use instructions, periodic recalibra-
tion is not required.
If at any time, you question the measuring accuracy, please
contact a Braun Service Centre.
Manufacturing date is given by the LOT number on the back
of the product. The first number after LOT represents the last
digit of the year of manufacture. The next three digits give the
day of the year of manufacture.
An example: LOT 2116 xx xx – this product has been
manufactured on the 116th day of the year 2002.
9
