Idiomas disponibles
Idiomas disponibles
English
Battery precautions
1. Do not use rechargeable batteries.
2. Use only 3V, CR2032 batteries of the same or equivalent type.
3. Insert batteries with the correct polarity.
4. Keep batteries away from children.
5. Dispose of exhausted batteries according to local legal re-
quirements. Do not dispose them by throwing away with normal
household rubbish.
6. Avoid short circuiting the contacts in the battery compartment
and battery terminals.
7. Remove batteries from the unit if it will not be used for long
period of time.
8. Exhausted batteries should be removed from the battery com-
partment to prevent over-discharge, which can cause leakage
and may cause damage to the clock.
9. Do not expose batteries to excessive heat such as sun, fire.
CAUTION: Danger of explosion if battery is incorrectly replaced.
Replace only with the same (CR2032) or equivalent type.
Precaution of using adaptor:
1. The AC/DC adaptor and apparatus should not be exposed to
dripping or splashing and no objects filled with liquids, should be
placed on the AC/DC adaptor and apparatus.
2. When disconnecting AC/DC adaptor it should not be obstruct-
ed and should be easily accessed. To completely disconnect the
power input, the AC/DC adaptor should be disconnected from the
mains.
3. Rated power consumption of the LCD clock is DC 5.0V
use ONLY the supplied DC 5.0V
3.0A adaptor to operate the
clock.
Getting started
1. Remove the battery door by turning with a coin or similar.
2. Take out button cell battery and remove the plastic strip.
3. Replace the button cell battery.
4. Close the battery door.
5. Plug the power adapter into the DC jack at the back of the
clock.
Note: The button cell battery is for time back up only in case of a
power outage or if the clock is temporarily unplugged.
The clock and charging function only work when plugged into a
mains socket via the included power adapter.
Function keys
ALARM / TIME / BRIGHTNESS switch
- Slide to the ALARM position to set the alarm time.
- Slide to the TIME position to set the clock time.
- Slide to the BRIGHTNESS position to set the clock display bright-
ness.
+ Key
- In the ALARM / TIME setting mode, press to increase the setting
value. Press and hold to speed up the setting.
- In the BRIGHTNESS mode, press to increase the clock display
brightness.
- Key
- In the ALARM / TIME setting mode, press to decrease the setting
value. Press and hold to speed up the setting.
- In the BRIGHTNESS mode, press to decrease the clock display
brightness.
12/24H Key
- Press to change to 12 or 24 hour format.
ALARM ON / OFF touch button
3.0A,
- Touch and hold the ALARM ON / OFF touch button for ~ 1 second
to enable the alarm, the green light will light up.
- Touch and hold the ALARM ON / OFF touch button for ~ 2 sec-
onds to disable the alarm, the green light will go out.
SNOOZE touch key
- Touch to stop the alarm and activate the snooze function.
RESET button
- Press by using a pointy object (such as a paperclip) to reset all
values to default. Reset the clock in case of a malfunction.
DATE button
- Press DATE button to set year/month/date.
Product description (Image 1)
1. LCD display
2. ALARM ON / OFF touch key
3. SNOOZE touch key
4. + key
5. – key
6. 12/24H key
7. Light sensor
8. ALARM / TIME / BRIGHTNESS switch
9. Backup battery compartment
10. RESET button
11. DATE button
12. DC jack
13. 2A USB-C port
14. 1A USB-C port
Display symbols (Image 2)
A. Time
B. Date
C. Month
D. Alarm icon
E. Alarm time
Setting the time
1. Slide the ALARM / TIME / BRIGHTNESS switch to the TIME
position.
2. Press the '+' or '-' key to set the desired value. Press and hold the
'+' or '-' key to speed up the setting.
3. Slide the ALARM / TIME / BRIGHTNESS switch to the BRIGHT-
NESS position to save the setting and return to normal display.
Setting the alarm
1. Slide the ALARM / TIME / BRIGHTNESS switch to the ALARM
position.
2. Press the '+' or '-' key to set the desired value. Press and hold the
'+' or '-' key to speed up the setting.
3. Slide the ALARM / TIME / BRIGHTNESS switch to the BRIGHT-
NESS position to save the setting and return to normal display.
