Idiomas disponibles
Idiomas disponibles
Adjustments
Adjustment menu
3 Contrast
1 Adjust the screen contrast to match the brightness level in the room.
Pressing the [3 key toggles between brightness and contrast.
| Direct operation |
Even if the menu screen does not appear, the contrast can be adjusted by pressing
the 3 or E key. If the 3 and E keys are pressed at the same time, the
maximum level (100) will be set.
Brightness
I Adjust the brightness to match the brightness level in the room so that the level
will be easy to see.
Pressing the [3 key toggles between contrast and brightness.
Note: If the 3 and B keys are pressed at the same time on the Brightness
__
adjustment screen, the standard level (50) will be set.
Size
&
Pos.
! Press the [3 key to select the zoom / horizontal position / horizontal size / vertical
position / vertical size adjustments.
Press the [D key to save the adjustment.
Zoom
* Both the horizontal and vertical size of the image can be adjusted at the same
time; however, the aspect ratio cannot be changed.
Press the 3 key to make the image smaller, the E key to make it larger.
[O H. Position !
The horizontal position of the image can be adjusted.
Press the 3 key to move it to the left, the E key to move it to the right.
H H. Size !
The horizontal size of the image can be adjusted.
Press the 3 key to make the image smaller, the E key to make it larger.
Note: Setting the image in the center of the screen to start will make the
adjustment easier.
V. Position
! The vertical position of the image can be adjusted.
Press the 3 key to make it downward, the E key to move it upward.
(XI V. Size !
The vertical size of the image can be adjusted.
Press the 3 key to make the image smaller, the B key to make it larger.
Note: Setting the image in the center of the screen to start will make the
__
adjustment easier.
1)
u
Geometry
: Press the [3 key to select the vertical pincushion / side pincushion balance /
trapezoid / parallelogram / Geometry
2
adjustments.
Press the Q] key to save the adjustment.
n V. Pincushion
I The image can be corrected for barrel distortion.
Press the 3 key to decrease the Pin / Barrel distortion of the image,
the B key to increase it.
(7 Side Pin. Bal.:
It is possible to adjust the side pincushion balance to the left and right.
Press the 3 key to expand to the left of the image, the E key to
expand it to the right.
!~\
Trapezoid
!The image can be corrected for trapezoidal distortion.
Press the 3 key to make the top edge narrower, the E key to make the
bottom edge narrower.
/~1
Parallelogram
!The image can be corrected for parallelogram distortion.
Press the 3 key to collapse the parallelogram to the left, the E key
to collapse it to the right.
t
\
Geometry 2 !
Press the B key to change the sub OSD screen.
Press the 13 key to select the Top Corner / Bottom Comer / S-Curve 1 /
S-Curve 2 adjustments.
EU Top Comer
I The image can be corrected for vertical pincushion distortion in the
top comer.
J
l Bottom Corner
I The image can be corrected for vertical pincushion distortion in
the bottom comer.
51
S-Curve
1 !
The image can be corrected for vertical pincushion distortion in the S-
Curve 1.
\
I ^ I I
52 S-Curve
2
!
The image can be corrected for vertical pincushion distortion in the S-
10
