SKF TKBA 11 Instrucciones De Uso página 11

4. Mounting the units
The TKBA 11 is equipped with powerful magnets, allowing the operator to
mount the system on almost any pulley or sprocket face.
Mount the units on the pulley or bracket faces to be aligned.
• The three passive targets should be mounted onto the pulley or
sprocket to be moved or adjusted.
• The laser emitting unit should be mounted on the stationary pulley
or sprocket.
The user must determine which pulley is movable and which is stationary.
The movable pulley or sprocket is often the smallest one, and is often
mounted on the motor shaft. In some cases both pulleys or sprockets and
shafts may need to be adjusted to achieve the desired alignment.
For non-ferrous pulleys or sprocket, it is possible to use a small bar clamp
(G clamp).
Fig.3 – Units mounted on pulleys
9
EN