Idiomas disponibles
Idiomas disponibles
Repair Kits
Before contacting the local FEBCO parts distributor, write down the
following information to have on hand when placing the order. The
serial number located on the assembly ID plate can assist in ordering
the proper kit.
• Item number and name. Locate the number and name of the item
in the "Parts" section.
All sizes of each kit or assembly include the items listed.
RUBBER PARTS KIT
Part No.
Item
2.2
3.1
CHECK MODULE ASSEMBLY
Part No.
Item
3
3.1
4
5
SINGLE POPPET KIT
Part No.
Item
4
5
Add-on/Retrofit Sensor Connection Kit
ORDERING CODE
ADD-ON/RETROFIT KIT
88009430
Limited Warranty: FEBCO (the "Company") warrants each product to be free from defects in material and workmanship under normal usage for a period of one year from the date of original shipment.
In the event of such defects within the warranty period, the Company will, at its option, replace or recondition the product without charge.
THE WARRANTY SET FORTH HEREIN IS GIVEN EXPRESSLY AND IS THE ONLY WARRANTY GIVEN BY THE COMPANY WITH RESPECT TO THE PRODUCT. THE COMPANY MAKES NO OTHER
WARRANTIES, EXPRESS OR IMPLIED. THE COMPANY HEREBY SPECIFICALLY DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
The remedy described in the first paragraph of this warranty shall constitute the sole and exclusive remedy for breach of warranty, and the Company shall not be responsible for any incidental, special
or consequential damages, including without limitation, lost profits or the cost of repairing or replacing other property which is damaged if this product does not work properly, other costs resulting from
labor charges, delays, vandalism, negligence, fouling caused by foreign material, damage from adverse water conditions, chemical, or any other circumstances over which the Company has no control.
This warranty shall be invalidated by any abuse, misuse, misapplication, improper installation or improper maintenance or alteration of the product.
Some States do not allow limitations on how long an implied warranty lasts, and some States do not allow the exclusion or limitation of incidental or consequential damages. Therefore the above
limitations may not apply to you. This Limited Warranty gives you specific legal rights, and you may have other rights that vary from State to State. You should consult applicable state laws to
determine your rights. SO FAR AS IS CONSISTENT WITH APPLICABLE STATE LAW, ANY IMPLIED WARRANTIES THAT MAY NOT BE DISCLAIMED, INCLUDING THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO ONE YEAR FROM THE DATE OF ORIGINAL SHIPMENT.
RP/IS-F-850S 2346
1/2"
3/4"
905-342
905-342
Description
O-ring
O-ring
1/2"
3/4"
905-347
905-347
Description
Seal
O-ring
Poppet
Seal Disc
1/2"
3/4"
905-339
905-339
Description
Poppet
Seal Disc
FP-FBF-BMS/IMS-FZ
BMS/IMS Freeze Sensor Connection Kit
• Valve size. Verify the size of the valve that the item is to be used on.
• Model number. Record the full model number found on the
assembly ID plate.
• Kit number. Use the tables below to find the number of the kit
containing the item.
1"
11/4"
905-343
905-344
Qty
Item
1
5
2
1"
11/4"
905-349
905-351
Qty
Item
1
5.1
1
5.2
1
6
1
7
1"
11/4"
905-340
905-341
Qty
Item
1
5.1
1
5.2
DESCRIPTION
Includes freeze sensor in mounting clip, activation module with mounting
hardware, wire nuts (2), and power adapter. Use this kit to add an indicator
of the freeze threshold for PVB assemblies in a BMS/IMS configuration.
Latin America: T: (52) 55-4122-0138 • FEBCOonline.com
980057
11/2"
2"
905-344
905-344
Description
Qty
Seal Disc
2
11/2"
2"
905-351
905-351
Description
Qty
Disc Retainer
1
Round HD Screw
1
Spring
1
Guide
1
11/2"
2"
905-341
905-341
Description
Qty
Disc Retainer
1
Round HD Screw
1
USA: T: (800) 767-1234 • FEBCOonline.com
Canada: T: (888) 208-8927 • FEBCOonline.ca
© 2023 Watts
