Idiomas disponibles
Idiomas disponibles
- To reduce likelihood of circuit overload, fire and electric
shock, do not operate with a solid state speed device, such as
a dimmer control switch. Do not use this heater with a timer
designed to automatically turn the unit on or off, as this may
accidentally disable the heater's thermal cutout safety feature.
- Use of this appliance on the same electrical circuit as another
high energy use product, such as a vacuum cleaner, blender,
variable speed fan or circular saw is not advised.
- Risk of fire. Do not operate any heater with a damaged cord
or plug or after the heater malfunctions, has been dropped or
damaged in any manner. Discard heater, or return to a Vornado
authorized service facility for examination and/or repair.
- Do not sit or stand on product.
- Never use the cord as a handle or otherwise yank, strain or
stretch the power cord.
- Do not insert or allow foreign objects to enter any ventilation
or exhaust opening as this may cause an electric shock or fire,
or damage the heater.
- Check your heater cord and plug connections. A loose fitting
outlet can cause the plug to overheat or cause a fire. Be sure
plug fits tight in the outlet. Check frequently during use to
make sure plug and outlet are not hot. If so, discontinue using
heater and have outlet replaced by a qualified electrician.
- Never ignore the signs of an electrical problem, such as: warm
outlet coverplates, sparks when plugging in or operating,
lights flickering/dimming during operation. Immediately turn
off and unplug the appliance if any such problems are noticed.
Contact a qualified electrician to investigate possible causes
before operating the appliance again.
6
English
- Note: Heaters draw more current than small appliances,
overheating of the outlet may occur even if it has not
occurred with the other appliances.
- Before moving, repositioning, servicing, cleaning and when
not in use, use the product controls to turn off the power
and then unplug. To disconnect from outlet, grasp and pull
only the plug. Also, power off and unplug if the product will
be left unattended for an extended period of time or during
electrical storms.
- This appliance has a polarized plug (one blade is wider than
the other.) To reduce the risk of electrical shock, this plug is
intended to fit in a polarized outlet only one way. If the plug
does not fit fully in the outlet, reverse the plug. If it still does
not fit, contact a qualified electrician. Do not attempt to
defeat this safety feature.
- If your heater suddenly stops working:
• This heater is equipped with a thermal cutout safety feature
designed to automatically shut off when overheating is
detected. See the "RESET HEATER" instructions in this
guide to determine how to check and reset the heater.
• If the heater and other electrical products suddenly stop
working at the same time, your home circuit breaker
or fuse may have tripped due to an overload of power.
Consider only running your heater on the "low" setting,
only running one heater at once and unplugging all other
electrical products while running the heater, and/or hiring
an electrician to install an additional circuit to your home's
electrical system.
SERVICING WARNING—To reduce risk of fire, electrical
shock and injury to persons, observe the following:
- Clean your product regularly, only as is instructed in this
manual. Prior to cleaning, turn off the power on your
product and unplug. Do not use gasoline, thinners, solvents,
ammonias or other chemicals for cleaning. Refer to the
CLEANING instructions provided.
- Do not open appliance housing while product is plugged in.
To avoid risk of shock, all service and/or repairs must be done
by a Vornado Authorized Service Center.
FCC CONSUMER ADVISEMENT
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept
any interference received, including interference that may
cause undesired operation.
NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and
receiver.
- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
- Consult Vornado Consumer Service or the dealer or an
experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to
operate the equipment.
Supplier's FCC Declaration of Conformity
Unique Identifier: Vornado Model AVH2 Advanced
Responsible Party: Vornado Air LLC
Mailing Address : 415 E. 13th St., Andover, KS 67002
Contact: www.vornado.com
SAVE THESE INSTRUCTIONS
7
English
