Idiomas disponibles
Idiomas disponibles
7. Loosen the cable port screws at the bottom of the power
pack (H). Thread the pre-stripped low-voltage cables
into the cable ports and push in firmly. Tighten the
screws securely.
OPERATING INSTRUCTIONS
After properly installing the power pack, turn on the
electrical source. There are two buttons for operation.
Press any button to turn to another working mode.
Push either button repeatedly to move to the different
selections.
"0"-- ON (lights stay on until manually turned off).
"A" --AUTO (lights turn on at dusk and off at
dawn.)
"1" through "9"-- TIMING (lights turn on at dusk
and off after the selected
number of hours).
ll
Hour
~
2 Hour
3
3 Hour
"' 4
Hour
I§
5 Hour
Ei
6
Hour
1
7 Hour
B
8 Hour
Auto On
at
Dusk
g
9
Hour
~~!~ ~~~t~t c;!~.
A
Auto On/Off ·ousk-to-Dawn·
a
Manual On/Off
A UP
~DOWN
PUSH
repeatedly
to select from 11
FUNCTIONS
If the manual circuit breaker trips, there is a risk of fire. Reset the unit or unplug the transformer and
check the following:
1. Is this cable correctly inserted into the power pack
terminals?
2. Is the unit overloaded or are the wires touching?
3. Are the fixtures correcly installed on the cable?
8
Lowes. co m/po rtfol io
