Idiomas disponibles
Idiomas disponibles
SWITCHING THE HOB ON
Press the on-off
appliance on. The displays will turn on in
the stand-by
position.
The control unit remains active for 10
seconds.
If no cooking zone is selected within
this time, the cooking top switches off
automatically.
SWITCHING THE COOKING ZONE
ON
Press the relative
desired cooking zone and press the
key within 10 seconds to set the power
level.
The power of the single cooking zone can
be adjusted in 9 different positions and will
be shown on luminous display B with a
number from "1 to 9".
POWER MANAGEMENT
The default cooktop maximum power limit
key to switch the
key to select the
Ø 210
1000
1600
2200
2800
3500
6000
7200
is 2800W. This power limit can be reduced
by the user to 1000W, 1600W or 22000W,
or increased to 3500W, 6000W, 7200W.
Each time the user tries to increase the
power of a cooking zone, the currently
active total power level of the cooktop is
calculated.
If this total power level is greater than the
cooktop maximum power limit, the power
increase of the cooking zone is not allowed.
An error beep sounds and the cooking
zone display shows an 'r' for 3 seconds.
or
The single cooking zone power is shown
in Fig. A (page 2).
Below there is the table of the possible
combinations of cooking zone power,
based on the pre-defined maximum power
level of the hob (1000W, 1600W, 2200W,
2800W,
3500W, 6000W, 7200W):
COOKING ZONES
1.
2.
Ø 145
3
3
4
4
5
5
7
5
7
7
P
9
P
P
17
(mm)
3.
4.
Ø 210
Ø 145
3
2
4
3
4
4
5
5
7
5
9
9
P
P
