Idiomas disponibles
Idiomas disponibles
The risk of burns remains until the
residual heat indicators have gone
out.
• WARNING: Use only hob guards
designed by the manufacturer of
the cooking appliance or indicated
by the manufacturer of the appli-
ance in the instructions for use as
suitable or hob guards incorporated
in the appliance. The use of inap-
propriate guards can cause acci-
dents.
• CAUTION: The cooking process
has to be supervised. A short term
cooking process has to be super-
vised continuously.
• DANGER OF FIRE: Do not store
items on the cooking surfaces!
Metallic objects such as knives,
forks, spoons and lids should not
be placed on the hob surface since
they can become hot.
• Always switch the cooking zones
off after use!
• The appliance is not intended to
be operated by means of an exter-
nal timer or separate remote-con-
trol system. This is not applicable in
case of switching-off the operation
by means of the devices covered
by EN 50615.
• The steam cleaner can not be
used.
The manufacturer's trademark and
model type can be found in the low-
er part of the device, visible after
opening the doors or drawers.
INSTALLATION INSTRUCTIONS
These instructions are for a specialized
installer and are a guide for the installation
process, regulations and maintenance
in accordance with the law and current
standards.
If the built-in oven or any other appliances
that produce heat, need to be installed
directly underneath the cooking hobs in
ceramic glass, IT IS NECESSARY THAT
THE APPLIANCE (oven) AND THE
COOKING HOBS IN CERAMIC GLASS
ARE ADEQUATELY ISOLATED, in such
a way that the heat generated from the
oven, measured on the right hand side of
the bottom of the cooking hobs, does not
exceed 60°C.
Failure to follow this precaution, could
cause a malfunction in the TOUCH
CONTROL system.
POSITIONING
The domestic appliance was built in order to
be encased on a work surface, the way it is
illustrated in the graph (Fig.1). Predispose
sealing material (Fig.4) along the whole
perimeter (for dimensions of the cut see
Fig.1). Lock the domestic appliance into
place with 4 supporters, keeping in mind
the width of the surface (Fig.2).
If the lower part of the appliance after
installation, is accessible via the lower part
of the furniture, it is necessary to mount
a separating panel keeping in mind the
distances indicated (Fig.3). This is not
necessary if underneath the induction hob
is installed an oven.
VENTILATION
The distance between the cooktop and
built-in kitchen's furniture or cooking
apparatuses must guarantee sufficient
ventilation of the air. Not to use the cooktop
if in the oven is in course the pyrolysis
process.
ELECTRICAL CONNECTIONS (Fig.5)
Before making the electrical connections,
check that:
14
