Idiomas disponibles
Idiomas disponibles
Warning: Make sure that the fan is fully assembled (and that the grills are in place and locked)
before switching it on.
• Place your fan on a level and dry surface, keeping in mind the safety precautions outlined.
• Plug the fan into a suitable mains socket (see technical specifications for details).
• Speed Adjustment: Turn the On/Off/Speed dial to the desired setting. There are 4 settings
• 0 (Off),
• I (Low speed),
• II (Medium speed)
• III (High speed).
• Oscillation function: Push the oscillation knob down to start oscillation. Pull it up to stop os-
cillation.
• Tilt adjustment: To adjust the air flow, the tilt angle can be adjusted. To do this, loosen the tilt
adjustment screw and adjust the fan head to the desired angle. Tighten the tilt adjustment
screw to fix the position.
Caution: The fan should be switched off when making this adjustment.
• Height adjustment: To adjust the height of the fan, loosen the height adjustment screw on the
outer pipe and push the inner pipe up/down to the desired height. Tighten the height adjust-
ment screw to fix the fan in place.
Caution: The fan should be switched off when making this adjustment.
Note: Fan height can be adjusted from 90 cm to 120 cm.
Caution: Always switch off and unplug the fan before performing any cleaning.
• Do not use harsh detergents, chemical cleaners or solvents as they may damage the surface
finish of the components.
• Use a vacuum cleaner with a brush attachment to clean the grills.
• Use a soft duster or a cloth rag to dust off all the surfaces.
• To clean the blade, first remove the front grill and cover by unscrewing the small screws around
the edge of the rear grill.
• Wipe all the parts with a soft damp (not wet) cloth dipped in mild soapy water.
Caution: Ensure that water doesn't get into the motor unit.
Use a dry cloth to thoroughly dry the blades and the grills before reassembling.
Make sure that the fan is completely assembled before switching on again.
OPERATION
CLEANING AND MAINTENANCE
9
E NGLI SH
