probst TAS-UNI-468 Instrucciones De Uso página 36

Idiomas disponibles

Assembly and adjustments

Measure the outer dimension at the TAS-UNI-DP (1) with a qualified measuring tool (6) e.g. yard stick (or slide

gauge). These measure must be equal at the front side and back side (see ).

→ Figure 10 and Figure 11.

Tighten both nuts again (tight) on the inner side at the TAS-DP. → Figure 12

Fig. 10

Also a pan profile with different lengths of

aluminium profiles is preparable.

→ see Figure B1

51000102

Fig. 11

(6)

(1)

Figure B (pan profil)

Remessure the actual

slope at the facing

bedding sand

1 %

Fig. 12

(6)

Reference level

Figure B1

12 / 18

1 %