Idiomas disponibles
Idiomas disponibles
3.
Golf, Touran: Adapt the PDC offset value on vehicles equipped with a VW parking distance control:
•
Address word 76 (Parking distance control)
o
Adaptation
4. For vehicles from model year 2008 fitted with Park Distance Control II or Park Assist, code the control unit in the self-diagnosis using
the VAS tester:
•
Address 10 (Park Distance Control or Park Assist)
o
08 Code the control unit
Change the code value: Byte 0 Bit sample xxxxxxx1 (x: enter the available values in the entry field). To do this,
5. For vehicles from model year 2010 fitted with Park Distance Control II or Park Assist, code the control unit in the self-diagnosis using
the VAS tester:
-
Vehicle self-diagnosis
o
10 park distance control II
▪
6. Tiguan, Octavia, Touran: On vehicles that were built on or after 6th June 2005 and that are factory-equipped with a control unit
supporting a trailer stabilisation, the activation of this function is mandatory.
To this end, adapt the anti-lock braking system control unit –J104 as follows, using the "Guided error location".
•
Guided error location
o
Select vehicle
▪
•
Go to "Function component selection"
o
Chassis
▪
If this adaptation option is not included in the control unit menu, trailer stabilisation is not supported by the control unit used or
automatically activated.
7. For vehicles from model year 2009, automatic activation of trailer stabilisation can be checked as follows when the trailer equipment is
connected:
-
Vehicle self-diagnostics
o
03 Brake electronics
▪
Only Touran: When using a trailer, the vehicle's central fuse, relay and terminal box must coded as follows to deactivate the rear fog
8.
lamp:
•
Select vehicle system: 09 Central electronic fuse, relay and terminal box
o
Identification: Continue
▪
Change coding value: Byte 8 bit character set x1xxxxxx (x: enter the current values in the input field), To do so, switch to the input
mode [BIN]."
9. – 13. Only Passat B6 up to and including MY2007:
9.
10. Turn off the ignition, pull out the ignition key, wait for 1 minute, and turn on the ignition.
▪
Channel 2
- 0–30 cm (recommend value: 11 cm)
switch to entry mode [BIN].
008 coding
•
Master
•
008 02 clear text encoding
>Continue (vehicle system test)
•
> Continue
Brake system
•
01 – Systems with self-diagnosis capability
o
Anti-lock braking system
▪
011 Measurement values
•
enter "10" and "Q"
o
Trailer yes
Select diagnostic function: 007 – Coding (Technical Support 1A)
•
Select vehicle system: Electrical system control unit Coding lang
321 800 391 101 - 009
trailer → hitch detachable
-
Functions
•
Adaptation-J104 with trailer stabilisation
o
Continue as indicated in the menu.
55
