Idiomas disponibles
Idiomas disponibles
14.
24. Always hold the machine with both hands, and raise
and lower the mixer while stirring.
Move the machine around the entire container during
the mixing process to ensure a homogeneous finish.
(Fig. M)
Warning! If the mixer scrapes against the surface of
the container while running, a sharp drop in speed
could occur. This also increases battery consumption
considerably.
Work the material until an adequate mix is achieved
in accordance with the recommendations indicated by
the material manufacturers.
The more viscous the material to be mixed, the
greater the torque that acts on the machine (higher
battery consumption).
25. Work in such a way that the rpm does not drop
sharply. Avoid stopping the rotation of the machine.
(Fig. N)
Disconnection:
26. Release the on/off switch to stop the machine. The
mixer paddle will continue to rotate for a few seconds.
Wait for the machine to fully stop before removing the
paddle. (Fig. O)
27. Do not transport the tool with the mixer paddle fitted.
3.4 Cleaning and maintenace
Cleaning and correct maintenance of the machine extends
the useful life of its tools.
Immediately clean the machine and the mixer paddle
after each use.
Remove the battery before carrying out any cleaning or
maintenance tasks.
1. To clean the mixer paddle, it is recommended to place
it in a container with clean water and rotate it at low
speed until it is clean. (Fig. P)
2. Keep the machine's cooling vents clean and clear of
obstructions.
Specific instructions for the battery charger:
Any repairs to the charger must only be carried out by
specialist technicians.
3. The charger must not be stored in a damp environment
or in locations with corrosive gases.
4. Clean the surface of the charger with a dry cloth only.
5. The charger cannot be disassembled. If the equipment
is damaged, contact the supplier or manufacturer.
6. If the charger power supply cable is damaged, only
the manufacturer, the customer support service or a
properly qualified person should replace it, in order
to prevent situations that might pose a danger to the
user.
Specific instructions for the battery:
The batteries are designed to provide a long, problem-free
service life. Nevertheless, for longer battery life, follow
these instructions:
-
Remove the battery from the charger once it is fully
charged and is ready to be used. (Fig. Q)
-
The battery should be charged within a temperature
range of 0 to 40°C.
-
The battery should be charged within a temperature
range of -20 to 40°C.
-
When storing the battery for more than 30 days,
English
TRANSLATION OF THE ORIGINAL
-
-
Storage
4.- ENVIRONMENTAL PROTECTION
Comply
environmentally sound management of waste and the
recycling of used tools, packaging and accessories.
Special safety instructions for machines with batteries:
7.
8.
9.
10. Before disposing of the tool, discharge and remove
11. Do not attempt to destroy or dismantle the battery,
12. Lithium-ion batteries must be recycled or properly
keep the battery in a location within the indicated
temperature range: -20 to 50°C
When storing the battery for more than 30 days,
keep the battery in a location within the indicated
temperature range: -20 to 35°C
To maintain optimal battery performance, charge
and discharge the battery at least once every three
months.
Store the tool in its packaging in a cool, dry place
protected against cold and direct sunlight.
The machine must be put out of service and
dismantled in accordance with the instructions in
each country, at a selective collection point for the
proper classification and processing of the materials.
After-sales service
Use only original spare parts supplied by the
manufacturer. Repairs should only be done by
certified workshops or RUBI's technical service:
www.rubi.com
Tel: +34 93 680 65 00
with
national
regulations
Only for countries in the EU: do not throw
electrical tools into your domestic rubbish. In
accordance with European directive 2002/96/
EC on waste electrical and electronic equipment
and the corresponding national legislation,
electrical tools must be collected separately and
recycled in an environmentally friendly way.
Batteries must not be discarded together with
domestic waste.
Return defective or used batteries to your Rubi
distributor.
Do not throw the battery into water.
its battery. Cover its terminals with reinforced
adhesive tape to ensure the contacts cannot be
short-circuited.
or any of its other components.
disposed of.
relating
to
