Idiomas disponibles
Idiomas disponibles
3.2. Especi caciones
Amperage range
Duty cycle*
Input Connection
Frequency
Nominal Max Current (Consumption)
Insulation class
MMA Electrode diameter
MIG Wire diameter
Wire spool weight
Dimensions
*Work cycle
Duty cycle is the percentage of time that the welding machine can deliver current to weld
continuously, in a period of 10 minutes. On the Elite XP this value is 55% when the output current is
maximum of its amperage and maximum ambient temperature is 40 ° C. This percentage increases as
the set output current decreases and / or the ambient temperature decreases.
Duty cycle may decrease if ambient temperature rises above 40 ° C.
This means that the machine is able to deliver its maximum output continuously for 4 and a half
minutes, and after this period the thermal control device will be activated and the user must let the
machine rest, turned on, for 6 minutes. After this period, you will be able to resume work normally.
10
Within a
minutes of work
¡Attention!: Do not exceed the work cycles established on the data plate included in the welder and
in these instructions.
Model
OCV
IP
Weight
5
minutes
WELDING
08
SWEISSWELD.COM
SKYWORKS 2060 NX
10-200 AMP
50%
110/220V
50 / 60 Hz
72V
48.2A (110V) - 46.2A (220V)
IP23
F
10.4 Kg
2.4mm - 3/32" to 5.0mm - 3-16"
0.6mm - 0.024" to 1.2mm - 0.045"
5Kg - 11Lb
46.0 x 19.0 x 32.0 cm
5
RESTING
minutes
