Epson TM-J2000 Manual Del Usuario página 13

Cleaning the Print Head
If printing becomes faint or uneven and the INK OUT LED is not on
or flashing, press the CLEANING button until the printer
mechanism begins to clean the print head (more than 3 seconds).
When the cleaning stops, the printer is ready for normal printing.
Transporting
To transport this printer, follow these steps:
1. Remove the ink cartridge.
2. Turn off the power supply.
3. Check that the POWER LED is off.
4. Remove the power supply connector.
5. Keep the printer upright while you pack it.
Limitations on Placing an Object on Top of the Printer
Be careful about placing heavy items on top of the printer. The
mass of any object placed on the printer must be 98 N (10 kgf) or
less. If the mass is between 19.6 N (2 kgf) and 98 N (10 kgf), you
must be careful about the limited area shown in the illustration.
❏ If the object has rubber feet or other such supports on its
bottom surface, the feet must not rest on the limited area.
❏ If the object has a perfectly flat bottom surface, the bottom
surface must extend beyond the edges of the limited area, as
shown in the illustration.
limited
area
TM-J2000/J2100 User's Manual 11
English