EGO COMMERCIAL HTX5300-P Manual Del Operador página 32

PROBLEM CAUSE
◾
◾
Excessive
vibration or
◾
noise.
◾
32
56-VOLT LITHIUM-ION COMMERCIAL 21" SHORT POLE HEDGE TRIMMER — HTX5300-P/HTX5300-P-FC
Dry or corroded blades.
Blade or blade support is
bent.
Bent or damaged teeth.
Loose blade bolts.
SOLUTION
◾
Lubricate the blades, following the
instructions in the "LUBRICATING
THE BLADES" section in this
manual.
◾
Replace with a new blade or
support. Contact EGO service
center for blade or blade support
replacement.
◾
Replace with a new blade. Contact
EGO service center for blade
replacement.
◾
Tighten the blade bolts. Use an
adjustable wrench and the included
hex key to tighten the blade bolts
clockwise.