Conference Mode With One Bluetooth Device On "Vol - Midland BTNEXT PRO Manual De Instrucciones

Activate Conference mode:
In "Intercom Mode" with no active audio, keep pressed the FWD button for 7 sec. The
voice announcement "Conference" will tell you that it is active.
When the Conference mode is active the bluetooth devices paired on Vol+ button are
disconnected, the paring on CTRL button and the Universal Intercom are not available.
Now only the paring on FWD and BWD buttons are available, together with the device
paired on the "Vol -" button. When in Conference mode, you can always move to "FM
radio" mode to listen your favorite radio station or to "Phone" mode to control the
phone connected on the VOL- button.
Disable Conference mode:
In "Conference Mode" with no active audio, keep pressed the FWD button for 7 sec.
The voice announcement "Intercom" will tell you that you are back to the "One to One"
Intercom mode and the device connected to the "Vol +" is available again, together with
the Phone, the pairing on CTRL button and the Universal Intercom.
Conference mode 4 people
When the conference mode is active, it is possible to open the conference communi-
cation pressing both the FWD and BWD buttons. One click on the button will open the
intercom communication, one click on the same button will close it. The two units that
are in the middle of the chain (unit 2 and 3) must keep the intercom open on both FWD
and BWD buttons to allow the full communication of the four units together.
"One Click Talk" function
When the conference mode is active, is possible to open the conference communica-
tion to all the 4 users just in "one click". Press short the CTRL (middle) button and you
will automatically open the conference to the four unit connected.

Conference mode with one Bluetooth device on "VOL-"

When the conference mode is active the Bluetooth device connected on VOL- is still
available, that mean you can listen to GPS street indication or answer your phone call
without "brake" the Conference connection chain.
The audio from the VOL- button connection can be "Private" (not shared in the Con-
ference) or "Public" (the audio is shared with conference).
www.midlandeurope.com
By default the setting of conference mode is "Private".
When you are in "private" mode if you receive a phone call or the GPS talk, you are
temporary disconnected from the Conference, but the other people can keep on talking
to each other. As soon as the Phone call is over (or the GPS stop talking), you are au-
tomatically back to the Conference.
› Activate Public mode: long press the "VOL-" button , you will here the voice "Public"
› Activate Private mode: long press again the VOL- button, the voice will tell you
"Private".
Attention: the incoming phone call is always "private" even if you are in "public" mode.
Conference mode up to 8 people (4 couple)
To have 8 people conference you need to pair one intercom device also to the "VOL- "
button and be sure you selected the "Public" option.
Attention: The paring of the intercom device on VOL- must be as "Universal Intercom".
By default the setting of conference mode is "Private", that mean the first time you
press long the "VOL-" button, you will hear the voice "Public". In case you heare "Priva-
te" you need to press again "VOL-" long untill you hear the voice "Public" mode.
How to pair an Intercom device on the "VOL-" button:
› On the BTNext Pro go in "Setup mode", press the "VOL-" button for 3 sec. The Blue
and Red Led lights will start flashing
› On the other device, follow the procedure to pair as an Universal Intercom
How to open the Conference for the "VOL-" unit
To open the conference from the BTNext Pro to the unit connected to the "VOL-", just
press the FWD button long.
To open the conference from the other unit connected to the "VOL-", just use the
command to open the Universal intercom connection.
The maximum distance of the device connected to the VOL- button is 10 mt, this is why
is suitable only for Passenger.
27