Operation; Switching The Power Supply Of The Equipment On/Off; Filtering The Water - Iberspa 41993E Manual De Instrucciones

4. OPERATION

The compact equipment enables you to perform several operations. They are all controlled by
the Automatic-Manual Selector and the filter selector valve.
Note: This manual only details aspects referring to the use of the compact kit.
operation of the Spa, please refer to the user manual of the Spa.
AUTOMATIC-MANUAL
No parts can be repaired by the user.
Do not try to repair this control box.
technical assistance. The installation should be carried out by an authorised electrician who
should follow all the electrical connection instructions of this manual
The selector is provided with a fuse to protect the filtering pump against overvoltage.
If a fuse blows, the button projects and a white band can be seen. It should be pressed to
reset.

4.1. SWITCHING THE POWER SUPPLY OF THE EQUIPMENT ON/OFF

To connect the equipment to the power supply, it should be connected to the electrical supply,
placing the differential switch in the ON position. To switch it off, place in the OFF position.

4.2. FILTERING THE WATER

As this is a digital system, filtering is controlled automatically by the pre-programmed filtering
cycles or when the system detects a reduction in temperature and activates the system to heat
the water. (See the Spa manual for further information). When the kit is operating normally, the
Automatic-Manual Selector should always be in the automatic position.
WARNING - RISK OF ELECTRIC SHOCK
Call your dealer or maintenance staff to request
ATTENTION
SELECTORSELECTOR VALVE
37
For normal