Idiomas disponibles
Idiomas disponibles
ENGLISH
CSC36VA
CORDLESS SCREWDRIVER
ORIGINAL INSTRUCTIONS
Dear Customer,
Many thanks for choosing to purchase a Casals
brand product. Thanks to its continuous effort,
our innovation and the strictest quality controls,
Casals develops electric Power Tools for the
toughest jobs.
READ THE SAFETY ADVICE AND
WARNINGS BOOKLET BEFORE USING THIS
PRODUCT.
GENERAL POWER TOOLS
SAFETY WARNING
- WARNING Read all safety warnings and all
instructions, illustrations and specifications
provided with this power tool. Failure to
follow all instructions listed below may result in
electric shock, fire and/or serious injury.
- Save all warnings and instructions for future
reference.
- The term "power tool" in the warnings refers
to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
USE AND CARE
Ensure that neither the air access nor exit
become either totally or partially covered by
drapery, clothing, etc., as this increases the risk
of fire.
Do not use the appliance if the cable or plug is
damaged.
Ensure that the voltage indicated on the charger
rating label matches the mains voltage before
plugging in the charger.
Connect the appliance to a socket that can supply
a minimum of 10 amperes.
Do not touch the plug with wet hands.
Disconnect the appliance from the mains when
not in use and before undertaking any cleaning
task.
This appliance is for household use only, not
professional, industrial use.
This appliance is not a toy. Children should be
supervised to ensure that they do not play with
the appliance.
PRODUCT DESCRIPTION
AND SPECIFICATIONS
DESCRIPTION
A
On/Off switch
B
Forward/Reverse Switch
C
Front LED light
D
Bit holder
E
Battery charge indicator
F
Battery power indicator button
G
Handle release button
H
Charger connector
I
Screwdriving bits
J
Charger USB cable
If the model of your appliance does not have the
accessories described above, they can also be
bought separately from the Technical Assistance
Service.
CHARGING THE BATTERY
Caution: A new battery is not fully charged and
must therefore be charged before the appliance is
used for the first time.
Charge the battery at an atmospheric
temperature of between 4 and 40ºC.
Conect the charger into a power supply of 5V.
Connect the charger jack to the socket on the
appliance. The socket is located at the lower/back
part of the appliance.
The red light will come on to indicate that the
charger is charging the battery.
When the battery is charged red light will switch
offand you can proceed to disconnect the charger
from the mains supply.
NB: Do not use the appliance while it is
connected to the charger.
HOW TO CHECK THE BATTERY'S CHARGE
LEVEL:
Press the Battery power indicator button when
disconnected to see the battery level.
NB: For a long battery life, it is advisable to
charge the battery, only, when it has run out
completely.
