Idiomas disponibles
Idiomas disponibles
5. Mount the blade onto the motor
shaft, ensuring that the surface of
the blade is flush with the surface
of the inner flange bulge. Mount the
outer flange and the nut
(Fig. 4e). Finger-tighten the nut in
COUNTERCLOCKWISE direction.
6. Position the gear case against a
solid surface for support. With one
hand holding the brush cutter shaft
and the other hand grasping the
multi-function wrench to tighten the
nut following the directional arrow
icon marked on the outer flange
(Fig. 4f).
56-VOLT LITHIUM-ION COMMERCIAL 12" BRUSH CUTTER — BCX4500/BCX4500-FC
Inner FLange Bulge
4e
4f
Nut
Outer Flange
23
