Idiomas disponibles
Idiomas disponibles
ADJUSTING THE BIKE HANDLE
WARNING:
battery pack from the product when you
are assembling parts, making adjustments,
cleaning, or when the product is not in use.
1. During shipping, the bike handle is
mounted on the shaft as shown in
Fig. 2a.
2. Loosen the wing bolt on the bracket
and then lift the bike handle 180°
around the shaft as shown in
Fig. 2b.
3. Turn the handle 90°
COUNTERCLOCKWISE to make it
face the cutter (Fig. 2c).
4. Tighten the wing bolt to secure the
bike handle in place.
WARNING:
personal injury. Only start the tool
when the bike handle is adjusted
perpendicular to the pole and the
operator holds it with both hands.
20
56-VOLT LITHIUM-ION COMMERCIAL 12" BRUSH CUTTER — BCX4500/BCX4500-FC
Always remove the
Risk of serious
2a
2b
2c
Bike Handle
Wing Bolt
