Operation; Cleaning And Maintenance; Replacing The Fuse - EuroLite ERX-4 Manual Del Usuario

Dip switch 1: one address
Dip switch 0: 4 channels
DMX Address

6. OPERATION

After connecting the device to the mains and switching the main circuit breaker, the ERX-4 is ready for use.
You can control the desired channel via you lighting controller.

7. CLEANING AND MAINTENANCE

We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no serviceable parts inside the device except for the fuses. Maintenance and service operations
are only to be carried out by authorized dealers.

Replacing the fuse

If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.
Before replacing the fuse, unplug mains lead.
Procedure:
Step 1: Unscrew the fuseholder with a fitting screwdriver from the housing (anti-clockwise).
Step 2: Remove the old fuse from the fuseholder.
Step 3: Install the new fuse in the fuseholder.
Step 4: Replace the fuseholder in the housing and fix it.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by authorized dealers only
in order to avoid hazards.
Should you have further questions, please contact your dealer.
DMX parallel:
Any DIP-Switch from 1 - 9 to ON
DMX:
Any DIP-Switch from 1 - 9 to ON
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
Function
1
0
20/39 00035719.DOC, Version 1.2