Rational iVario 2-XS Instrucciones De Modificación página 17

2. Move the end clamp and install the clamps.
>
Clamps are installed.
Work steps – Installing the 4-way relay PCB
a
The bracket and 6 bracket clamps are ready.
a
The 4-way relay PCB is ready.
1. Attach 2 mounting clips to the top of the bracket and 4 to the bottom of the
bracket. The nibs on the mount must point upwards.
1 | MI_2321: Retrofit 4-way relay PCB XS, 2-S
17 / 156