Idiomas disponibles
Idiomas disponibles
indicator (a ) and cutting speed indicator (c)
become lit.
3. Press the cutting blade start button and pull the
operatng bail to start the machine.
4. If the warning indicator (d) lights up or is flashing,
refer to Troubleshooting for solutions.
5. Release the operatng bail. The blade stops
rotating after a short delay. If the mower cannot
stop, remove the battery and contact the service
agent.
LED indicators
a.
BATTERY INDICATOR
b.
BLUETOOTH INDICATOR
c.
CUTTING SPEED INDICATOR
d.
WARNING INDICATOR
F
b
c
Adjusting the cutting height (See Fig. G)
Adjust the cutting height through cutting
height adjustment levers of front and rear
wheel.
G
WARNING! Stop, release operating bail and
wait until the motor stops before adjusting
height. The blades continue to rotate after the
machine is switched off, a rotating blade can cause
injury. Do not touch rotating blades.
a
d
1——1"
/25 mm
2——1.5" /38 mm
3——2"
/51 mm
4——2.5" /64 mm
5——3"
/76 mm
6——3.5" /89 mm
7——4"
/102 mm
8——4.5" /115 mm
OPERATION:
Starting & Stopping the mower (See Fig. H)
1. Press the on/off switch
2. Press the cutting blade start button (Hold Down)
and pull the operating bail to start the machine.
3. Release the operatng bail to stop.
WARNING! The blade continues to rotate
after the mower has been switched off; wait
until it has completely stopped.
NOTE: For starting, press the cutting blade start
button and pull the operating bail at the same time.
NOTE: Keep pressing the on/off switch and the
dispaly become lit. The display will automatically turn
off if there is no any operation within 60 seconds.
H
2
Operating the self-propel system (See Fig. I)
1. Press the on/off switch
2. Pull the self-propel engagement bail to start the
self-propel system.
3. Release the self-propel engagement bail to stop.
I
2
2
1 2
1
13
EN
