Idiomas disponibles
Idiomas disponibles
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list and diagram above. If any part is missing or damaged, do not attempt to
assemble the product. Contact customer service for replacement parts.
Estimated Assembly Time: 30 minutes
Tools Required for Assembly: Phillips screwdriver and metric socket set
(or two adjustable wrenches)
ASSEMBLY INSTRUCTIONS
Note: During each step of assembly, assemble
all hardware and hand tighten. Once all the
hardware is installed for that particular step,
tighten all the hardware.
1. Attach the front axle assembly (H) to the
front frame (F) using four M8 x 20mm
carriage bolts (DD), four M8 lock nuts (II),
and four M8 washers (FF).
Attach the outer ends of the steering linkage
using two M6 x 20mm shoulder bolts (EE),
M6 lock nuts (KK), and M6 washers (LL), as
shown in Fig. 1.
Hand tighten all bolts until after Step 2.
Hardware Used
M8 x 20mm
DD
Carriage Bolt
EE
M6 x 20
Shoulder Bolt
FF
M8 Flat
Washer
(tools not included)
.
x 4
x 2
x 4
4
DD
F
EE
KK
FF
II
M8 Lock Nut
M6 Lock Nut
LL
M6 Flat Washer
Fig. 1
II
H
x 4
x 2
x 2
