Owner's Manual |
Troubleshooting
dle
r.)
Insert one (1) AA battery (not
included) into the battery socket
with the positive terminal facing
nega-
out, then screw on the ignitor
button until tight. Be careful to not
over tighten.
osi-
rner
e.
e-
3-7mm
10
n of
Ensure that the ignition needle is
Assembly Guide
S T E P 0 9
front leg.
S T E P 1 0
Use one (1) M6x16 screw to secure the paper towel bracket to the left front leg.
S T E P 11
AA battery under the ignition button.
Thread one (1) M6x16 screw into the inner hole of the left
Insert the paper towel holder bracket under the inner M6 screw.
Place the four (4) control knobs onto the valve stems. Insert one
Model 1932