Fly Safe
It is important to understand some basic flight guidelines, both for your protection and for the safety
of those around you.
1. Flying in Open Areas: pay attention to utility poles, power lines, and other obstacles. DO NOT fly
near or above water, people, or animals.
2. Maintain Control at All Times: keep your hands on the remote controller and maintain control of the
aircraft when it is in flight, even when using intelligent functions such as the Route and Fruit Tree
modes and Smart Return to Home.
3. Maintain Line of Sight: maintain visual line of sight (VLOS) with your aircraft at all times and avoid
flying behind buildings or other obstacles that may block your view.
4. Monitor Your Altitude: for the safety of manned aircraft and other air traffic, fly at an altitude lower
than 100 m (328 ft) and in accordance with all local laws and regulations.
Visit https://fly-safe.dji.com for more information on critical safety features such as GEO zones.
Flying Considerations
1. DO NOT use the aircraft in adverse weather conditions such as snow, fog, winds exceeding 6 m/s, or
heavy rain exceeding 25 mm (0.98 in) in 12 hours.
2. DO NOT fly more than 4.5 km (14,763 ft) above sea level.
3. The DJI Agras app will intelligently recommend the payload weight of the tank according to the
current status and surroundings of the aircraft. When adding material to the tank, the max weight
should not exceed the recommended value. Otherwise, the flight safety may be affected.
4. Make sure that there is a strong GNSS signal and the D-RTK antennas are unobstructed during
operation.
Return to Home (RTH)
The aircraft will automatically return to the Home Point in the following situations:
Smart RTH: user presses and holds the RTH button.
*
Failsafe RTH
: the remote controller signal is lost.
*
Low Battery RTH
: the aircraft battery level reaches the preset low battery threshold.
The aircraft decelerates and brakes and hovers if there is an obstacle within 20 m of the aircraft. The
aircraft exits RTH and waits for further commands.
* The action of the aircraft when the remote controller signal is lost or the aircraft battery level is low can be set in the
app. Failsafe RTH and Low Battery RTH will only be available if RTH is set.
Obstacle avoidance is disabled in Attitude mode (which the aircraft enters in situations such as when the
●
GNSS signal is weak) and is not available if the operating environment is not suitable for the radar modules or
binocular vision system. Extra caution is required in such situations.
14