Bosch 0 601 190 025 Manual Original página 17

Ocultar thumbs Ver también para 0 601 190 025:
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 27
OBJ_BUCH-117-003.book Page 16 Wednesday, June 9, 2010 11:31 AM
16 | English
Water Extraction
In order to collect the water coming out of the
bore during wet-drilling, a water collection ring
and a multi-purpose vacuum cleaner are re-
quired (both accessories).
The choice of the water collection ring depends
on the diamond drill (GDB 2500 WE or
GDB 1600 WE/DE) being used.
For assembly of the water collection ring, read
and observe its operating instructions.
Working Advice
For drilling, observe the operating instruc-
tions of your diamond drill.
For drilling, loosen the lock pin for the feed han-
dle 17 (see "Feed Handle").
Lower the drill to the required drilling depth by
turning the feed handle.
Then, turn the crank back until the core bit is
completely visible.
Maintenance and Service
Maintenance and Cleaning
Always keep the rack 9 and the guide surfaces of
the der drilling column 2 clean.
Readjusting the Drill Fixture (see figure H)
In order to achieve good drilling results, the play
between the drill fixture 8 and thr drilling col-
umn 2 must be as small as possible.
For readjustment, loosen the four Allen screws
27. Tighten the sliding elements 26 with slight
pressure toward the drilling column by turning
the two adjustment screws 28. Pay attention
that the drill fixture is aligned parallel to the
drilling column.
When the sliding behaviour is sufficient, lock the
adjustment screws 28 by retightening the Allen
screws 27.
1 609 929 W61 | (9.6.10)
If the drill stand should fail despite the care tak-
en in manufacturing and testing procedures, re-
pair should be carried out by an authorised af-
ter-sales service centre for Bosch power tools.
In all correspondence and spare parts orders,
please always include the 10-digit article
number given on the nameplate of the drill
stand.
Accessories
Transport Wheels . . . . . . . . . . . . 2 609 390 309
Fastening set:
– for concrete . . . . . . . . . . . . . 2 607 000 744
– for brickwork . . . . . . . . . . . . 2 607 000 745
Quick-clamping column . . . . . . . 2 608 598 111
Operation with GDB 2500 WE:
– Water collection ring . . . . . . . 2 609 390 389
– Sealing lid for water
collection ring . . . . . . . . . . . . 2 609 390 391
Operation with GDB 1600 WE:
– Water collection ring . . . . . . . 2 609 390 310
– Sealing lid for water
collection ring . . . . . . . . . . . . 2 609 390 311
After-sales Service and Customer
Assistance
Our after-sales service responds to your ques-
tions concerning maintenance and repair of your
product as well as spare parts. Exploded views
and information on spare parts can also be
found under:
www.bosch-pt.com
Our customer service representatives can an-
swer your questions concerning possible appli-
cations and adjustment of products and acces-
sories.
Bosch Power Tools
loading

Este manual también es adecuado para:

S 500 a professional