Chain Tension; Instructions For Use And Maintenance For The User; Previous Precautions; Switching On And Off - arilex 2ASG Instrucciones De Uso

2.11.- CHAIN TENSION

The chain is located on the left side where the entire electrical part is
located, so before removing the side cover proceed to disconnect the
device from the network. To tighten the chain loosen the 4 screws that
take the motor to tighten the chain, and retighten the screws.
3.- INSTRUCTIONS FOR USE AND MAINTENANCE FOR
THE USER

3.1.- PREVIOUS PRECAUTIONS

- This device is for professional use only and must be used by qualified
personnel.
- To carry out maintenance, cleaning or repairs, the gas cock must be
closed.
Periodic checks will be carried out, in accordance with the regulations in
force in the country in which the device is to be installed.
The manufacturer is not responsible for the damages caused by the use
of the machine with any modification, elimination or lack of maintenance
of its components carried out without prior and express authorization of
the manufacturer.
This device has very hot surfaces, in particular the crystals and direct
contact should be avoided without the use of gloves.

3.2.- SWITCHING ON AND OFF

See section 2.9.
3.3.- PLACING THE CHICKENS IN THE SPITS
The placement of the chickens is very important to give a greater firm-
ness during roasting, otherwise the legs or wings could be loosened and
compromise the perfect roast.
To do this we will place the spit in vertical position with the first skewer
firmly secured by the screw and place the chicken on the side of the legs
so that the first hook will hold the legs of the chicken well, we will place
a second hook attached to the chest and wings of chicken and so on. At
the end place the last skewer with screw, tighten the screw.
The number of chickens per spit will depend on the weight and size of
the chickens if the chickens are 1Kg and 5 chickens per spit if they were
bigger would enter from 4 to 5.
17