Idiomas disponibles
Idiomas disponibles
3.4 Installation of water system
INTERNAL PUMP
1)
Use the pipe a (900 mm, provided with the machine) to connect the cut-off valve of the mains to the tap
1 for water inlet to the water softener (figure 3).
2)
Connect the pipe b for internal pump suction to the tap 2 of the water softener (figure 4).
a
Figure 3
EXTERNAL PUMP (OPTIONAL)
1)
Use the pipe a (900 mm, provided with the machine) to connect the cut-off valve of the mains to the tap
1 for water inlet to the water softener (figure 5).
2)
Connect pipe c (600 mm, provided with the external pump) to the pump suction with tap 2 of the water
softener (figures 6-7).
3)
Connect pipe d (of the water system of the coffee machine) to the pump delivery (figure 7).
a
Figure 5
3.5 Drain line
Connect the drainage tube to the grounds collecting tray and to the water drainage system.
3.6 Electrical connection
plate corresponds to the electrical mains.
ble.
characteristics (power and voltage) shown on the rating tag. The omnipolar switch must
1
Figure 4
1
b
Figure 6
b
2
b
2
Figure 7
c
-
-
31
