golmar Stadio Plus Manual De Instalación página 55

DOOR PANEL PROGRAMMING
It will be necessary to enter into the programming menu to configure the system properties.
For a proper system operation, the menus marked with an asterisk must be configurated.
Two different programming menues are available: installer, that allows to modifiy any of the
system properties and user, that only allows changes that do not affect the system operation.
Programming options with black text and white background are availables in both menues;
options with white text and black background are only availables on installer menu.
The first time you enter into the programming menu, the display messages will appear in spanish.
Press OK when the display shows the message
. Press OK to change to english or till the desired language appears.
castellano
If the option Direct Call Code (page 108) is disabled, it will not be necessary to fill the repertory
name for a proper system operation.
Use the arrow keys to move through the programming menu. Option changes will be validate
by pressing OK key, even if CANCEL key is pressed later.
Use CANCEL key to exit from the configuration menu. The door panel will automatically exit
from the configuration menu after 90 seconds with no operation.
golmar
16:30
1
pin code
pin:____
*
configuration
access control
repertory
P
rogramming menu.
: the display will show now
configuracion
C
O.K. ANCEL
To enter into the main programming menu,
press key symbol and enter
the installer PIN code (factory default: 1315)
or the user PIN code (factory default: 1111).
3 1 5 or 1 1 1 1
On this menu the system configuration options
can be changed.
Press OK to enter into this menu.
Access control options can be changed on
this menu. Press OK to enter into this menu.
This menu allows to fill the repertory and
to change its options.
Press OK to enter into this menu.
Continue
106 107
Coming from previous page
configuration
english
*
master panel
*
general panel
*
panel address
modify value
panel address
*
panel w. camera
DOOR PANEL PROGRAMMING
To enter into configuration menu, follow
the steps described on the previous page
O.K.
and press OK when the display shows the
message
CONFIGURAtION
Allows to choose the language of the displayed
messages and the programming menues.
To choose a different language press OK
until the desired language will be displayed.
Each system must have one master panel only;
the rest of panels must be slave.
yes
In systems with general entrance panel
configure as master one panel of each
internal building.
Press OK to change this value.
If this panel is a general entrance door panel
select YES.
yes
Press OK to change this value.
Sets the building code. In buildings with
more than one panel, set them with the
:000
same code; in systems with general entrance
panel, set 0 code for the general entrance
panel and a different code for each internal
O.K. panel (valid codes are from 1 to 255).
To change this value press OK: the display
will show the message
:000
Key in the new building code and confirm
by pressing OK.
0 1 5
If CANCEL is pressed the former value
will be restored.
O.K.
:015
If this panel is a video door panel select YES.
Press OK to change this value in case of
yes
audio door panel only.
C
onfiguration menu.
.
.
modify value
Continue